Sunday 29 April 2012

Comminution '12- conference diary

Comminution '12, the 8th in the series of international comminution symposia, was held at the Vineyard Hotel, Cape Town, from April 17th-20th. The following is not a comprehensive report, so I invite comments from all those who attended, or anyone who didn't but may have views on some of the issues raised.

Tuesday 17th April

This morning I opened the conference, welcoming the first of our 253 delegates who will be here in Cape Town over the next four days, and representing 30 countries (posting of 17th April).

I spoke of the quiet revolution that took place in comminution during the latter part of the 20th century and this was taken up by our first keynote speaker, Chris Rule of Anglo Platinum, who discussed how a typical PGM concentrator might look in 2020, with feed grades declining and the mineralogy becoming more complex and difficult.

I asked a general question on whether rod and ball mills will play a significant, or any, role in future comminution circuits. Chris felt that rod mills will play an insignificant role, as they are severely limited in terms of size, and ball mills may play a diminishing role as the upper feed size range of stirred mills increases.

MEI Consultant Malcolm Powell, of Australia's JKMRC, presented an overview of how the newly formed Global Comminution Collaborative (GCC) is addressing future design needs and challenges. The drivers and needs of the industry are evolving, so our tools and capabilities need to advance to adequately address these. New drivers that require a considerable step change to meet the new challenges facing our industry include: energy -­ the mining industtry is being targeted as an excessive user of energy; water - the limitation in production due to a shortage of availability; massive low grade ore bodies ­ the dropping ore grades lead to vastly increased tonnages and treeatment of waste and thus processing costs; increasing demand for natural resources ­ driving up the total energy and water usage within the miniing sector. One of the things that Malcolm emphasised is that collaboration is essential these days for effective research and development (see also posting of 29th March). The GCC, for instance, is a collaborative research effort between the JKMRC, Chalmers University, Sweden, the University of Cape Town, Haceteppe University, Turkey, and the University of Rio de Janeiro.

Both Chris and Malcolm pointed out that early rejection of gangue will increase in importance, as a means to reduce energy consumption, and this was emphasised in a paper presented by Grant Ballantyne of the JKMRC.
Comminution accounts for approximately 30 -­ 40% of the energy consumed on an average mine site, 4- 9% of Australia's energy and possibly more than 50% additional energy is embodied in steel grinding consumables. Energy savings of up to 50% are theoretically possible by employing novel circuit designs and using smart separation techniques that reject coarse liberated gangue. A range of different strategies such as selective mining, screening, ore sorting, coarse flotation and dielectrophoresis can be used to reject the coarse liberated gangue at different particle sizes. These technological advances have the potential to increase the throughput in the comminution circuit, while decreasing the energy consumed per tonne or ounce of metal produced.

The SELFRAG exhibit booth
As comminution evolves, new methods will be introduced into circuits. High voltage breakage is a novel comminution method that relies on highly energetic electrical pulses to weaken or fully fragment materials. The potential for integration of high voltage breakage into existing processing circuits was discussed by Klaas van der Wielen, based on work on a SELFRAG device at the Camborne School of Mines, UK.

These were just some of the 20 papers presented in a very long day. These included work on SAG and autogenous mill design and modelling, dynamic simulation of crushing plants, and the importance of classification in grinding circuits.

It's great to see the increasing involvement from China and The Republic of Korea at recent MEI Conferences. The Korean company Cenotec, a major sponsor and exhibitor, has 5 delegates. There are 9 delegates from China, and two Chinese companies, Chemco and Sinoma, are also major sponsors and exhibitors.

The delegates from China

Wednesday 18th April
Another full day commenced this morning with the second keynote lecture, presented by Ted Bearman of Bear Rock Solutions, Australia. His presentation on step change in the context of comminution emphasised some of the points raised by Chris Rule, Malcolm Powell and me yesterday, paricularly regarding rejection of waste material prior to comminution, the evolution of circuits, and the need for collaborative research efforts.

Much has been written about innovation and the need for "game-changing" step change. There is no doubt that there are many challenges facing the mining and minerals industry and hence it is appropriate that the industry examines the level of response required. In terms of comminution, the area bears much of the burden for the use of energy in the mining-processing system. Given this specific issue it is reasonable to consider that step change should be targeted at the reduction of the energy input per unit of metal produced. It is important to consider energy in terms of the final output as without this effort could be misdirected.

To ensure the maximum effectiveness of innovation in this field, comminution must be regarded as a component of the wider system that encompasses the size reduction from the in-situ rock mass to a saleable product. In regard to the total system, some of the key considerations are philosophical, not technological. Such points include the need to simplify circuits, increase flexibility, examine the impact of variability and consider the end-game.

In essence the total system is not about breaking rocks to a size, it is about breaking only what requires size reduction, to the point at which a saleable product can be generated. With this in mind the context for step change is set and formed the basis for Ted's discussion.

Ted's paper, and many of the other 15 papers presented today, are available in the conference Proceedings, but I was disappointed that many authors failed to submit their full papers despite many reminders to do so.

Arkady Senchenko (left) and Anna Shevtsova (right)
with John and Donna Starkey
Today's presentations covered a fairly eclectic field, including closed circuit ball mill basics, real-time grinding control, modelling, vertical shaft impact crushers and roller mills, and the increasing use of HPGR in comminution circuits. The latter included a paper by conference sponsor TOMS of Russia, which described positive and negative experiences in the use of HPGR in gold and copper mines in Russia and Kazakhstan. This paper was interesting not only for its content, but also by the presentation, made in Russian by Arkady Senchenko and simultaneously translated by his interpreter Anna Shevtsova.

After two very intensive days it was good to get away from the conference atmosphere in the evening, and take the short trip around the mountain to the centre of Cape Town for the conference dinner at the Gold Restaurant. More photos can be found on the posting of 19th April.

Thursday 19th April
Despite the copious amount of wine consumed at last night's dinner, there was a very good turnout this morning for a day dominated by ultrafine grinding.

Fine grinding using stirred mills and ceramic beads is relatively new to the mining industry so there is much interest in the media for these mills, and
the increasing importance of ultrafine grinding is reflected by the number of manufacturers of ceramic beads from around the world who are exhibiting their products at the conference.
Cenotec, Korea
Chemco, China
Sinoma, China
Keramos, Australia
King's Ceramics, China
DMM, South Africa
AMSAT, USA
.....and yet more beads
Attrition mills have been used predominantly for ultrafine and fine grinding applications, but recently more interest has been shown on moving this technology further up the milling circuit to operate as tertiary and secondary mills downstream from the traditional ball mills. The move towards manufacturing much larger stirred mills has enabled the technology to be considered for run of mine processing. For instance the IsaMill has been used commercially in concentrator plants for over 15 years. Improvements in ceramic grinding media, mill design and wear components have advanced the IsaMill to the point where it can readily accept F80s of +300 microns, as discussed in a paper from Xstrata Technology, Australia, and a paper from FLSmidth, Canada, asked the question - is this a threat to traditional tumbling ball mills, or can it been seen as complimentary?

Maelgwyn Mineral Services booth
A paper from Maelgwyn Mineral Services, UK, introduced a new type of ultrafine grinding mill that incorporates a twin drive mechanism that offers potential savings, and compared the effectiveness of its primary grinding mechanism to two types of current ultrafine grinding mills ­ a single drive horizontal mill and a vertical mill. The single drive horizontal mill relies on high shear near the surface of the impeller disks to obtain particle breakage whilst the vertical mill relies on a combination of the rotational shear and the static head of the media load. The new twin drive mill creates a fixed bed in which the media are subjected to high shear and compressive forces to abrade feed material whilst reclaiming and recycling excess energy from the media mass.


Friday 20th April
The final day, and less intense with only 12 papers, featuring media and liners, modelling using DEM and the use of PEPT to investigate mill conditions.

Malcolm Powell finished the morning session by giving a short introduction to the Coalition for Eco-Efficient Comminution (CEEC). This has been set up to bring people together to accelerate implementation of improved processes in comminution, which consumes between 1 and 4% of global electricity, and is increasing as we have to grind finer and finer. As the conference has shown, there is a need for new technology and improved circuits, grinding less by scalping off low value material and optimisation of regrind circuits. Optimising the value chain by means of geometallurgy will increase in importance, the essential objective being to change the grinding conditions continuously as the ore changes.

After the final technical presentation, Malcolm summarised the 4 days, and was encouraged to see that industry is now interacting with academic researchers to develop new techniques, collaboration once more being emphasised and is developing as a result of networking at conferences such as this. Ultrafine grinding is becoming more important but it is necessary to prepare material carefully for fine grinding, not merely to tag fine grinding machines to the end of conventional circuits. It is now possible to grind down to 30 nanometres, but how does industry deal with particles of this fine size?

Our other MEI comminution consultant, Aubrey Mainza then discussed the future, and what he would like to see in forthcoming comminution conferences.

There are great challenges in energy utilisation and he would like to see examples of process routes which have been used to address these issues.

There have been many papers on modelling, and it would be good to see how these models are validated in actual plants, and how control strategies implementing models have been used to improve processes, and how equipment has been designed using DEM, CFD etc.

Amanda then closed the meeting, and invited delegates to Comminution '14, which will be held at the same venue from April 7-10, 2014, after which we all adjourned to the sunshine and the Vineyard's magnificent gardens for a few welcome glasses of wine.

The Proceedings of the conference is now available on CD, and authors have been invited to submit their final papers to Minerals Engineering for peer review. Those accepted will be published in a special comminution volume and on ScienceDirect.

16 comments:

  1. Thanks for the conference update. I'll be looking for some of these papers.

    Are details available about the 'Global Comminution Collaborative'? This sounds like interesting effort. It'll be interesting to see what comes of it & how well outputs are actually communicated.

    Step change in outcome is an interesting objective and a necessary one! However, it's easy to overlook the cumulative effect (value) of many small changes; and the ease of making many of the small improvements. Sadly, there seems to be an increasing gap between the promise of new developments for the optimization of processing facilities and reality in operations where it's a struggle to maintain stable performance.

    Why are many operations unable to take advantage of small incremental improvements with little to no risk, where the implementation path is well defined and the results proven? There are many parts of the answer to this question. What are thoughts out there, what do you see at the operations you work at / visit??

    Posted by Robert Seitz, Rio Tinto, USA in Minerals Engineers group

    ReplyDelete
    Replies
    1. Thanks Robert. Malcolm Powell and the other collaborators are formalising things, after which I hope to have more information on MEI Online.

      Delete
  2. I like this post very much, You have defined it very simply for so I understand what you say, In this post your writing level is also excellent to us. This is great issue you have done on this topic really very well.

    ReplyDelete
  3. Hello Barry
    Sounds like a good conference and thankyou for your report. Some very interesting comments.

    I would like to raise one point for discussion that may be relevant in terms of energy efficiency and cost of energy vs capital. I am old enough to remember some of the original gold milling circuits for `new` CIP plants in Australia which used ball mills with cyclones operating at low feed density with very good classification and then the cyclone overflow going to a thickener for water removal prior to CIP. Then what happened fairly quickly was that operators and designers realised that for these types of ores you could dispense with the thickener and operate the cyclones with much less classification and accept a greater variability in cyclone O/F particle size distribution (PSD). This saved a lot of capital but led to overgrinding of fine fractions as well. I realise mills are sized on a nominal P80 or whatever particle size but surely PSD must have an impact as well? Will the cost of energy move us back the other way perhaps? Should we design our milling circuits with true classifcation and then final thickening? How important is good classification to overall energy efficiency? For example: - if we classified very well at at larger p80 (with final product thickening) would we in fact achieve the same metallurgical outcome in the end and save energy.

    Posted by John O'Callaghan, Outotec, Finland, in Minerals Engineers Group

    ReplyDelete
    Replies
    1. Thanks for this John, which has opened up a seconday discussion on classification in miling circuits in the Minerals Engineers group: http://tinyurl.com/bsall83

      Delete
  4. A general comment on the venue: everything is well set up at the Vineyard, except for the internet access in the residential area of the hotel. This was extremely slow and unreliable - particularly at peak times such as during the day - and not up to the standard needed for an international conference. It would need to be radically improved before Comminution 2014.

    Posted by Paul Cleary, CSIRO Australia, in Minerals Engineers Group

    ReplyDelete
    Replies
    1. Thank you for your comments above. During your conference we had two networks available, a conference network and a hotel guest network. South African internet speed is not on a par with most technically advanced countries. In the UK, for instance, I am told it is possible to get a 100mbps line into a home; in SA we are only now starting to see 8mbps lines. The internet capacity into SA has been increased over the past few years, but is expected to take a further step forward with the launch of a new 500gbps cable for South Africa on the 11th of May 2012. We are constantly looking at improving our internet offering and currently have one of the largest internet pipes for guest use installed of any Cape Town hotel. We will continue to work at improving the technology we use to deliver internet as we see this as a very important side of our business.

      Regards
      Roy Davies, General Manager, Vineyard Hotel

      Delete
    2. Thanks Roy. Talking to Paul at the conference, I know he was having great problems downloading large PowerPoint files from Australia, but for 'normal' use, such as checking emails and web-browsing I found the system perfectly adequate, if not super-fast. I have always been frustrated by internet speed and reliability during my travels in South Africa, but the Vineyard system is about as good as it gets. Last year I was at a SAIMM conference in Phalaborwa and the internet at the Hans Merensky Hotel was so slow as to be effectively useless, so I soon gave up. I am pleased to hear that the Vineyard system will be improved in time for MEI's November conferences.

      Delete
  5. 1. Because the setting is like a resort, it is attractive to bring one’s spouse. We came early, stayed over for two days and turned it into a fine holiday.
    2. The restaurant ambiance and food service was great. It was like dining out to eat at the hotel – a big plus for saving time and relaxing.
    3. The satellite room was exceptional from my view because I had two reports to finish that would not have been completed if we could not sit apart and work while listening to the papers.
    4. The conference summary noted the weaknesses – too much theoretical data, not validated, and not enough plant data that is always more valuable than the theoretical stuff.
    5. More mining company presentations should be solicited to bring a more ‘operating flavor’ to the conference. That would make it even more attractive for delegates to register. People want to hear about practical ideas that work.

    John Starkey, Starkey & Associates, Canada

    ReplyDelete
  6. I think the technical conferences mineral processing industry, are generally among other things, meetings to exchange information and operational experience. I think that Comminution '12 is very "biased" to academics and vendors. I believe that the academic and vendors must exist, but not "surround" most of the conference. Those who work designing concentrator plants or in the operation of these, attended conferences with the idea of learning new things and to be applicable in the short to medium term.

    One of the most important purposes of the conference is to exchange information. Many who attended we do not want to take notes of the presentations as in college. We believe it is a right delivery of a complete copy of the conference proceedings.

    There is a little disappointment attending a conference and did not get a copy of all submitted articles, including presentations. I think that the authors and exhibitors must submit their articles well in advance of the conference, so that they can be given to participants accordingly.

    Posted by Carlos Contreras, BHP Billiton - Chile

    ReplyDelete
    Replies
    1. Many thanks for your useful comments Carlos. There is certainly no intended bias towards academics and vendors. The conference is open to all, and we encourage attendance no matter what the job description.

      I am pleased that you raised the question of certain authors not submitting their papers. As you can see from the timetable certain Institutes were particularly guilty in this respect and it is something we are now addressing (see my blog posting of today, 3rd May). Having had a paper accepted for presentation it is a requisite to submit a paper, but many authors are ignoring the final deadline for various reasons. We hope to have a solution to this for the November conferences, and certainly in time for Comminution ’14.

      Delete
  7. Photos from the conference are available at http://www.min-eng.com/comminution12/photos/

    ReplyDelete
  8. In addition, I would like to reiterate that I was impressed by the number and depth of researchers presenting at the event. To have such a strong pool of interested and motivated researchers is a real bonus for the industry. How can such a wonderful set of professionals best contribute to the industry ? We keep saying that energy is our "burning platform" in comminution, but how much longer can we delay our response ? Human history and our nature suggests that we will put-off the effort until the last possible moment. I would argue that with the available "brains-trust", we should seek every possible opportunity to engage in truly transformational research and not be content to continue analyzing the same subject matter, but in greater and greater detail. I would therefore strongly support efforts to gain greater industry participation (& direction) and also to further develop and expand collaborative ventures such as the GCC.

    ReplyDelete
  9. Thoroughly enjoyed the conference, great venue and some very good presentations. As suggested above the conference would benefit from more industry involvement however this was clearly the case going into the event and as such the conference delivered on my expectations. A good forum to gain an appreciation of the major areas of research in the comminution field.

    One disappointment was the absence of even draft level papers for several of the presenters. This is not what would be expected from a conference of strong standing in our industry,in my opinion all presenters should be required to submit a paper for reference by the delegates.

    ReplyDelete
    Replies
    1. Many thanks for your comments Aidan, particularly relating to the missing drafts, which was also highlighted above by Carlos. This is a major area of concern for us, and one which we will now be addressing for future conferences.

      I am afraid we have made submission of drafts more of an option than a requirement, but from this November onwards we will take a more hard-line approach. Authors will be made aware that draft papers must accompany their presentations, and any author who fails to submit a draft by the final deadline will have the presentation withdrawn from the programme.

      Delete
  10. To my point of view the conference is very useful for both, scientists and practicing specialists, working in this field. I would like to thank all the organizers once again for a wonderful conference.

    TOMS is planning to participate in the conference in 2014 and to be a sponsor as well.
    Best regards,
    Arkady Senchenko, Managing director, TOMS institute, Irkutsk, Russia

    ReplyDelete

If you have difficulty posting a comment, please email the comment to bwills@min-eng.com and I will submit on your behalf